Xbox Series X USB and Pair Button Board Replacement

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Traduction de l’étape 2

Anglais

Français

Étape 2

Remove the USB board

Use your fingers to lift the skinnier side of the board.
Pull the board away from the enclosure and out from under its clips to remove it.
Check if your replacement board comes with a cable. If it doesn't, remove the cable from your original board and transfer it to your replacement.
During reassembly, first insert the board under its clips on the wider edge of the enclosure and then lay the board into place.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.