Introduction
This is a prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.
Ce dont vous avez besoin
-
-
Flip your PS4 upside-down with the back side facing towards you.
-
-
-
Use a pair of tweezers to remove the sticker in the center of the back of the PS4, exposing the first screw.
-
Remove the two stickers at the outer edges, exposing two more screws.
-
-
-
-
Remove the three 7.2 mm-long TR8 Torx security screws on the back of the PS4.
-
-
-
Use a pair of tweezers to pull the power supply cable straight out to disconnect the power supply unit from the motherboard.
-
Use your fingers to grab the white connector head, and wiggle or "walk" the connector out of its socket to disconnect it.
-
In extreme cases, you might need to use needle nose pliers to get a good grip on the connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
